Event Single

Do you want to know about the John Deere 3032E Compact Utility Tractor Price USA? or looking for John Deere 3032E Specifications, Overview and Images, then here you will get that all kinds of information, which you want to know about it.

John Deere 3032E Compact Utility Tractor featured with Standard four-wheel drive(4WD) for maximum traction, Hydro transmission with Twin Touchâ„¢ pedals for ease of use, On-board diagnostics including Service Advisor, and Category 1 3-pt hitch compatible with dozens of implements.





Model John Deere 3032E
Brand John Deere
Category Tractor
Price $20,314.00 USD*
Rating
Engine Specifications
  • Family : EYDXL1.64NDA FYDXL1.64NDA GYDXL1.64NDA
  • Manufacturer : Yanmar
  • Engine model : 3TNV88C-NJT
  • Engine power (gross) : 22.9 kW 31.2 hp
  • Power take-off (PTO) power : 18.6 kW 25 hp
  • Rated engine speed : 2500 rpm
  • Type : Diesel
  • Injection pump type : High pressure common rail direct injection
  • Aspiration : Natural
  • Emissions compliance : Final Tier 4
  • Cylinders/displacement : 3 / 1.64 L 3 / 100.2 cu in.
  • Number of cylinders : Three
  • Cylinder liners : Cast-in-block
  • Bore and stroke : 88 x 90 mm 3.46 x 3.54 in.
  • Compression ratio : 19.1:1
  • Lubrication : Pressurized
  • Cooling system : Water pump
  • Air cleaner : Dual element
  • Engine torque at rated speed : 87 Nm 64.2 lb-ft
  • Fuel tank capacity : 28.5 L 7.5 U.S. gal.
  • Fuel Type : High pressure common rail direct injection
Transmission Specifications
  • Standard transmission; forward/reverse : Hydrostatic transmission (HST)
  • Left-hand reverser : No
  • Final drive : Bull Gear
  • Steering : Power steering
  • Axle capacity : Front 798 kg 1760 lb Rear 1197 kg 2640 lb
  • Creeper : No
  • Cruise control : Optional
  • Differential lock : Yes
Hydraulic Specifications
  • Type : Open center
  • Pump rated output : Steering 15 L/min 4 gpm Implement 20.2 L/min 5.3 gpm 35.2 L/min 9.3 gpm
  • Pump type : Dual gear
  • Maximum operating pressure : 172.4 bar 2500 psi
  • Draft control sensing : Position control
  • Remote control valves available : Up to two (optional)
Power Take-Off (PTO) Specifications
  • Standard : 540 rpm at 2500 rpm
  • Control : Independent
  • Clutch : Wet disk
  • Brake (for mid and rear PTO) : Wet disk
Dimentions Specifications
  • Wheelbase : 159.5 cm 62.8 in.
  • Front axle clearance : 36.3 cm 14.3 in.
  • Turning radius without brakes : 2.9 m 9.4 ft
  • Approximate shipping weight (open-station; cab) : 1007.9 kg 2222 lb
Break Specifications
  • Brakes : Wet disc
Other Specifications
  • Front tyres : Farm - 7-14 Turf - 27x8.5-15 R4 - 25x8.5-14 R4 - 27x8.5-15
  • Rear tyres : Farm - 11.2-24 Turf - 41x14-20 R4 - 15-19.5 R4 - 43x16-20
  • Clients
  • Clients
  • Clients

No Comment(s) Available

    Leave a Comment